About: You'll get 1 set of ceiling drape made of metal and acrylic. It includes 15 strands of iridescent beads (preset on 2 rods), 4 rods, 8 ceiling hook mounts, 8 sets of steel brackets, and 8 sets of screws. The overall size is 15ft long and 20ft wide. Each bead strand is 14.8ft long, with a bead diameter of 1cm and thickness of 1mm. The rods are 20ft long and 0.5ft wide. Information: 2 rods come with beads pre - installed, and the other 2 are not attached. There's a bag of parts for hanging. Each steel bracket has 2 washers, 2 nuts, 2 screws, and 2 stoppers pre - installed and is attached to a support beam. Each set of screws has 2 screws and 2 plastic anchors. Each rod has triangular hangers at both ends for the ceiling hook mounts. Installation: Find 2 parallel support beams. Place a steel bracket on the beam, insert screws through plastic anchors into the bracket's small ovals on the beam. Align a ceiling hook mount with the screws and secure it with stoppers. Repeat for another hook mount. Slide the preset rods with beads into the hook mounts. Optionally, use the remaining rods to create different drape effects by pushing rods against beads and aligning the strands.
How to use: First, find or create two parallel support beams with enough space between them. Then, follow the installation steps in the description to set up the ceiling drape. You can adjust the distance between the rods to create a wide or narrow drape effect according to your preference. You can also use the remaining rods to add more drape effects. Note: Make sure the support beams are strong enough to hold the weight of the drape. When installing, be careful with the small parts like screws and stoppers to avoid losing them. Maintenance: To keep your crystal beaded ceiling drape looking great, gently dust the beads with a soft cloth regularly. If the beads get dirty, you can soak them in a mild soapy water solution and then rinse them carefully. Let them dry completely before re - assembling the drape.
